Manual cement feeding system - 80 hp:

⚫ You have to make the arrangement to dump the CEMENT/FLY ASH in the powder form in to the feed hopper.
⚫ The feed hopper will have a screw at the bottom which will continuously pump the material into the convey line.
• Convey line is connected with high capacity blower to generate the sufficient force to convey the material into the storage silo.
• The system will have a facility to convey the loose fly ash which comes into the bulker.
⚫ Our pre-engineered Separately Designed screw pump, Blower and its components are ready for installation and require minimum attention for startup.
⚫ CEMENT/FLY ASH will be transferred inside the tubing without any obstruction to the Silo. The system proposed herein is totally enclosed and sealed.

➤ TECHNICAL SPECIFICATIONS:

• This System is separately design for easy to operating and lower maintenance.
• One 30HP Screw Feeder is design for Bag Unloading by connecting blower to this system.
• When Bulker unloading Blower Should connected to bulker by using Standard Rubber Conveying Hose.
• Feed Hopper made of mild steel having capacity of 650 Kg (Cement).
• Toughened Screw mounted on the heavy sturdy Bearing blocks and complete with 30 HP 415 V+ 10% / 50 Hz/3 Phase, Non Flame Proof, Any Standard Make Electric Motor.
50HP (950 CMH, 0.8 Kg/cm2) JYOTI make Roots Blower with 50HP Any Standard Make Electric Motor.
• This System is also used for Jumbo Bag Feeding.